Installing ioControl R6.1c Software Patch Oct. 4, 2005 ********** IMPORTANT ************ IMPORTANT *********** IMPORTANT *********** ioControl R6.1c is distributed as a software patch, not as a standalone installation program. To use this patch, ioControl R6.1a must already be installed on your computer. See the instructions below for more information. ********** IMPORTANT ************ IMPORTANT *********** IMPORTANT *********** Installing ioControl R6.1c if ioControl R6.1a Is Already Installed ------------------------------------------------------------------ Do the following: 1) If you haven't already done so, download the file ioControl_R61c_patch.zip from the Opto 22 Web site here: http://www.opto22.com/support/softwareDrillDown/softwaredrilldown.aspx?SoftwareID=125 2) Exit the ioControl application if it is currently running. 3) Uncompress the ZIP archive using WinZip or a similar program. (In Windows XP, double-click a ZIP archive to uncompress it.) 4) Now find the ioControl directory on your computer. By default, ioControl is installed in the following location: C:\Program Files\Opto22\ioProject Software\ioControl 5) Drag or copy the files you uncompressed into the ioControl directory. When a prompt asks if you want to replace existing files, click Yes. ioControl R6.1c installation is complete. Installing ioControl R6.1c if ioControl R6.1a Is Not Installed -------------------------------------------------------------- Do the following: 1) Install ioControl R6.1a on your computer. If necessary, download the ioControl R6.1a installer from the Opto 22 Web site here: http://www.opto22.com/support/softwareDrillDown/softwaredrilldown.aspx?SoftwareID=101 2) If you haven't already done so, download the file ioControl_R61c_patch.zip from the Opto 22 Web site here: http://www.opto22.com/support/softwareDrillDown/softwaredrilldown.aspx?SoftwareID=125 3) Uncompress the ZIP archive using WinZip or a similar program. (In Windows XP, double-click a ZIP archive to uncompress it.) 4) Now find the ioControl directory on your computer. By default, ioControl is installed in the following location: C:\Program Files\Opto22\ioProject Software\ioControl 5) Drag or copy the files you uncompressed into the ioControl directory. When a prompt asks if you want to replace existing files, click Yes. ioControl 6.1c installation is complete.